How to Clean Airpods Case Inside [8 Solutions]

Use a dry microfiber cloth to gently wipe away any visible dust or debris. For deeper cleaning, use a cotton swab dampened with a 70% isopropyl alcohol solution to sanitize the inside surfaces. Let fully dry before charging. Check audio and charging functions afterwards. Be very gentle around microphone meshes and connector pins.

Keeping your AirPods case clean is important for both hygiene and proper functioning. Dust, debris, and grime can build up inside the case over time. This can lead to issues charging your AirPods, problems with the hinge, unwanted particles getting inside the AirPod itself, and generally degrade the appearance of your case.

Fortunately, cleaning the inside of your AirPods case is easy. With some basic supplies and these step-by-step instructions, you’ll have it looking like new in no time. How to clean airpods case inside?

Supplies You’ll Need

Before getting started, gather the following cleaning supplies:

• Microfiber cloth
• Cotton swabs
• Isopropyl alcohol (70% solution)
• Compressed air (optional)
• Small brush (optional)

Make sure to use a soft microfiber cloth and gentle brush designed for electronics. Regular tissues or paper towels could scratch your AirPods case.

Step 1: Remove AirPods & Inspect Case

How to clean airpods case inside? The first step is to pop open your case and remove both AirPods. Give each AirPod a quick inspection to check for damage or excessive debris buildup before setting them aside.

Next, closely inspect the inside of the now-empty case for problem areas. Check crevices, speaker meshes, the upper lid, hinge area, and the main charging cavity. Make a mental note of any visible dust, sticky residues, or other grime.

Step 2: Use Compressed Air

If you have compressed air available, use short bursts blown across the surface of the inside to dislodge loose particles. Don’t use high pressure streams directly on one area as this can push debris further inside.

Gently blow out any large dust bunnies or clusters you see to prepare for more detailed cleaning. Pay extra attention to speaker meshes, crevices, and intake vents that are prone to buildup.

Helpful tip: Twisting a microfiber cloth into a point can help reach tight spaces.

Step 3. Loose Debris Removal

Now it’s time to clear out all loose debris that remains. This will prepare the case for disinfecting and condition the surfaces.

Use the microfiber cloth, cotton swabs, and cleaning brush to gently wipe down all inside surfaces of the case. Carefully wipe across speaker meshes, connector pins, nooks, and crannies.

For stubborn debris that won’t budge, use a slightly dampened cotton swab. Avoid excess moisture near any openings or charger contacts.

Be firm but gentle while cleaning to lift grime without damaging any components. Check often for particles embedded in the cloth or swab tip.

Step 4. Disinfecting & Deodorizing  

At this point your AirPods case should be clear of all loose dust and particles. Now let’s sanitize the case and neutralize odors with an alcohol cleaning solution.

Moisten your microfiber cloth lightly with isopropyl alcohol. Gently wipe down all inside surfaces of the case, allowing surfaces to air dry afterwards.

This will disinfect the case and help eliminate odors that build up over time. Be very careful to prevent any excess dripping near sensitive electronic components.

Caution: Don’t use bleach solutions or harsh chemicals – this can degrade plastic and coatings.

Step 5. Charging Port & Connector Pins

Pay special attention when cleaning the main charging cavity. Use a dry cotton swab to carefully clean the charging port opening and connector pins located inside.

Rotate a dry cotton swab gently around the port to lift debris. Never insert anything directly into the port opening. You can also use short compressed air bursts across pins.

Buildup on charging connectors can lead to issues powering on your AirPods or displaying charge state. Take time to thoroughly clean this area before moving on.

Step 6. Hinge Area

If you still notice dust or grime around the hinge, the best way to tackle it is using cotton swabs dampened lightly with isopropyl alcohol.

Rotate dampened cotton swabs to wipe down the crevices surrounding the hinge on both halves of the case. Let the alcohol solution sit briefly before gently wiping again with a dry swab.

Be very cautious using liquids around any openings or mesh covers. Meticulously dry the entire area with a microfiber cloth once cleaned.

Step 7. Microphone & Speaker Mesh

Finally, inspect the microphone and speaker meshes carefully under bright light. Look for debris caught in the mesh or any visible staining.

First, use short compressed air bursts aimed across the mesh (not directly into it) to dislodge surface particles trapped on top. For more stubborn debris stuck below the mesh surface:

• Moisten cotton swab and gently roll across mesh to lift grime  
• Allow mesh to completely air dry afterwards  
• Repeat using a dry swab to remove any remaining moisture

Take great care not to push any debris further into the mesh, as this can permanently clog or damage speakers. Patience is key for the best results cleaning meshes.

Additional Readings:

How to Clean Airpods Microphone.

How to Clean Airpods Case Stains [6 Steps].

Step 8. Reinsert AirPods & Test

Once satisfied with cleaning, put your AirPods back in both sides of the case. Press down gently to engage charging contacts before closing the lid.

Check that your AirPods display a charging tone when reopened. Test audio quality and microphone pickup to confirm full functionality.

If you experience any lingering charging issues or muffled audio, you may need an electronic cleaner solution applied to the connector pins. Contact Apple support for next steps.

Preventative Maintenance  

How to clean airpods case inside? Regular cleaning airpods will help avoid extensive buildup or difficult issues over time. Here are some quick tips:

1. Gently blow out case with compressed air once a week  
2. Use dry microfiber cloth to wipe down case before charging each night
3. Disinfect charging cavity once a month with alcohol wipe  
4. Avoid exposing case to moisture or oils from skin
5. Use an electronic contact cleaner if pins get corroded

Developing consistent maintenance habits will keep your case looking and working like new!

how to clean airpods case inside? Hopefully you now feel equipped to tackle any dusty AirPods case with ease. Consistently following these steps as issues occur will keep your AirPods in great shape for reliable everyday use.